Resins and Reinforcement

Lay-up Resin AP101PA

Our general purpose resin provides the matrix to encapsulate and protect the glass fibre chopped strand mat reinforcement. Information leaflet T10 available upon request.

Size Code  
1kg 1020040 £11.84
2.5kg 1020057 £20.55
5kg 1020064 £35.69
4 x 5kg 1020071 £107.00

Gelcoat GC150PA

Gelcoat provides protection of the glass fibre reinforcement and an aesthetically pleasing finish.

Size Code  
1kg 1020002 £15.67
2.5kg 1020019 £28.38
5kg 1020026 £43.43
4 x 5kg 1020033 £130.00

Opaque Colour Pigments

Used for pigmenting gelcoat (add at rate of 6-10%) & lay-up resin (2%). NB. Adding an excessive
amount of colour pigment will inhibit the cure of the resin.
Colours Available: Black, White, Brown, Ivory, Grey, Light Admiralty Grey, Dark Blue, Mid Blue, Turquoise Blue, Zircon Blue, Light Green, Mid Green, British Racing Green, Pirate Red, Post Office Red, Golden Yellow, Jasmine, Tangerine & Purple

Size Code  
25g 1020088 £3.07
500g 1020095 £11.87

Translucent Colour Pigments

Used for tinting gelcoat.
Colours Available: Red, Yellow, Blue, Green, Magenta and Amber

Size Code  
25g 1020101 £3.31
500g 1020118 £12.63

Catalyst (Hardener)

Add to resin 2% by weight.

 Size Code  
20ml for 1kg Resin 1010157 £3.19
50ml for 2.5kg Resin 1010164 £3.99
100ml for 5kg Resin 1010171 £5.99
4 x 100ml for 20kg Resin 1010188 £18.99

Catalyst Dispensing

For safe and accurate dispensing of catalyst.

 Size Code  
10ml measuring cylinder 1020187 £2.66
500ml Dispenser 1020170 £8.77
1L Swedtool Dosimeter 1020165 £14.40

Syringes

  Pack Code  
5ml 10 1004002 £2.52
10ml 10 1004019 £3.19
20ml 5 1004026 £2.98

Trylon Cleaner

An Acetone based cleaner for washing resin from brushes and laminating tools. This liquid is highly flammable and skin contact should be avoided.

Size Code  
1 Litre 1020637 £8.99
5 x 1 Litre 1020644 £38.99

Trylon Thinners

A styrene monomer, which can be added to a polyester resin in order to reduce its viscosity. Normal addition rate is 5-10% by weight of the resin.

Size Code  
500ml 1020705 £7.29
1 Litre 1020712 £12.49

Reinforcements

Chopped Strand Mat

The most common form of reinforcement. Consists of chopped glass strands, bound together with binder. The mat comes in 3 different thicknesses expressed as weights per square metre.

CSM - 300g/m² Size Code   Per
Up to 25m 1020194 £3.27 Metre
More than 25m 1020200 £2.65 Metre
30-35kg Box 1020217 £4.99 Kilo
         
CSM - 450g/m² Size Code   Per
Up to 25m 1020224 £4.77 Metre
More than 25m 1020231 £4.17 Metre
30-35kg Box 1020248 £4.99 Kilo
         
CSM - 600g/m² Size Code   Per
Up to 25m 1020255 £5.66 Metre
More than 25m 1020262 £4.75 Metre
30-35kg Box 1022549 £4.99 Kilo

Woven Rovings

Glass woven fabric, which can be draped with a weight of 280g/m². Use in conjunction with CSM or alone to produce laminates of high strength.

 Size Code   Per
Up to 20m 1020279 £4.99 Metre
More than 20m 1020286 £4.19 Metre

Diolen

A polyester cloth that is tougher than woven rovings and is manufactured in a width of 90cm and weight of 265g/m².

 Size Code   Per
Up to 20m 1020408 £7.99 Metre
More than 20m 1020415 £7.29 Metre

Surface Tissue (90cm Wide)

The finest glassfibre for providing a smooth surface to the chopped strand mat. Use 'fluffy' side down to prevent tool pick-up.

 Size Code   Per
Up to 20m 1020309 £1.99 Metre
More than 20m 1020316 £1.79 Metre

Glassfibre Tape

Use for local reinforcement & for the reinforcement of joints. All are 50m rolls.

Size Code  
25mm 1020330 £6.75
50mm 1020347 £10.85
75mm 1020354 £16.28
100mm 1020361 £20.49

Chopped Glass Strands

6mm long Chopped Glass Strands

Size Code  
1kg 1020385 £7.59
5kg 1020392 £34.99

Polyester Film (Melinex)

For excluding air from resin surfaces or as a temporary mould use film, which is re-usable. (910mm wide x 0.05mm thick)

Quantity Code  
Per Metre 1020620 £4.10

Two Part Polyurethane Foam

A two part component. Water blown PU foam suitable for in-situ marine buoyancy and void filling applications. A 2kg pack produces approximately 0.04 cubic metres of rigid closed cell foam. Information Leaflet T55 describes the procedure and available upon request.

Size Code  
2kg Pack 1020729 £22.98
10kg Pack 1020736 £97.40

Pro Finish Filler Paste

For repairs & filling of GRP moulds and automotive repairs. With a 10-30 minute setting time and sandable immediately after cure. Kits come complete with hardener, applicator and instructions. Weights are approximate.

  Size Code  
Kit No.1 1kg 1020460 £7.20
Kit No.7 3.5kg 1020477 £26.80
Hardener 40g 1020484 £2.63

G4 Primer Sealer

Use to seal porous masters/moulds prior to the application of release wax. It can also be used for sealing damp walls & floors and to prevent dust on concrete floors.

Size Code  
500g 1020576 £10.71
5kg 1020590 £59.99

Meguiars No.8 Release Wax (Hard)

An excellent general purpose wax to provide the maximum number of releases per application

Size Code  
311g 1020552 £19.24

Meguiars No.88 Release Wax (Soft)

A softer wax, which is easier to apply but requires more frequent application.

Size Code  
311g 1020569 £19.24

Liquid Release Agent

Used in conjunction with release wax on porous or detailed surfaces. Coloured liquid to indicate coverage.

Size Code  
1 Litre 1020606 £6.99
5 Litres 1020613 £28.00

Solution MW

A wax solution which can be added to gelcoat or flowcoat at an addition rate of 4% to give a tack free surface.

Size Code  
250ml 1020682 £5.69
500ml 1020699 £9.99

Laminating Tools

Laminating Brushes

A low cost brush suitable for wetting out the laminate with resin.

Size Code  
13mm 1021061 £0.55
25mm 1021078 £0.69
50mm 1021085 £0.84
75mm 1021092 £1.29
100mm 1021108 £1.59

White Bristle Brushes

A higher quality brush suitable for the application of a gelcoat & for laminating.

Size Code  
13mm 1021112 £0.83
25mm 1021115 £0.95
50mm 1021122 £1.29
75mm 1021139 £1.79
100mm 1021146 £2.13

Rollers

Paddle Rollers

Very effective at removing trapped air from laminates

Size  Code  
70mm x 21mm Dia 1021191 £6.32
70mm x 45mm Dia 1021207 £8.18
140mm x 21mm Dia 1021214 £7.43
180mm x 21mm Dia 1021221 £7.54

Fin Rollers

Useful for consolidating thicker laminates to remove air

Size Code  
35mm x 12mm Dia 1021238 £10.53
70mm x 12mm Dia 1021245 £11.41
140mm x 22mm Dia 1021252 £16.28
70mm x 30mm Dia 1021269 £19.21

Corner Roller

A wheel roller for accessing those awkward corners of the moulding to achieve consolidation

Size Code  
40mm Dia Wheel  1021276 £19.88

Mould Wedges

For tapping in between the moulding & the mould surface, for ease of release without damage.

  Rigid    Flexible  
    Code       Code    
130mm x 50mm 1021320 £2.99 130mm x 50mm 1021337   £2.99
175mm x 75mm 1021344 £3.99 175mm x 75mm 1021351   £3.99

Ancillaries

Graduated Wax Paper Cups

Packs of 500g cups - Not suitable for Trylon Cleaner

Pack Code  
10 1020750 £3.19
100 1020767 £19.99
1000 1020774 £149.00

Polypropylene Cups

Packs of 500g capacity cups - Reusable

Pack Code  
10 1020811 £4.29
100 1020828 £35.00
300 1020835 £99.00

Mixing Sticks

10mm x 125mm

Pack Code  
100 1020880 £1.70
1,000 1020897 £14.00
10,000 1020903 £99.00

Wood Spatulas

15mm x 150mm

Pack Code  
100 1020910 £2.99
1,000 1020927 £25.99

Plastic Mixing Bucket

Mixing buckets

  Pack Code  
2.5 Litre 1 1020842 £1.79
2.5 Litre 10 1020859 £15.99
5 Litre 1 1020866 £1.89
5 Litre 10 1020873 £16.99

Hand Cleanser

Size Code  
1 Litre 1020934 £7.69
2.5 Litre 1020941 £17.60
5 Litre 1020958 £33.00

Disposable Gloves

Pack Material Code  
100 Polyethylene 1020972 £1.79
Box 1000 Polyethylene 1020989 £15.99
Box 100 Latex 1020996 £6.99

Disposable Aprons

Plastic Sheet Aprons

Pack Code  
25 1021009 £2.81
100 1021016 £9.90

Safety Glasses

Quantity Code  
Per Pair 1021054 £6.50

Particle Mask

Quantity Code  
Each 1021047 £0.59

Low Cost Paint Brushes

Bristle diameter of 5mm with yellow plastic handles

Pack Code  
20 1012922 £3.99
100 1012939 £16.50

Diamond Edged Cutting Tools

Circular Saws

Continuous Rim Saws

 

Dia (mm) Grade Nominal Width Code  
25 44/60 1.6 1021665 £14.25
40 44/60 1.6 1021696 £17.20
50 44/60 1.6 1021726 £22.00
65 44/60 1.6 1021757 £27.25
75 44/60 1.6 1021795 £31.50
90 44/60 1.6 1021856 £37.50
100 44/60 1.6 1021887 £33.00
100 44/60 2.4 1021917 £36.25

Side Spoked Saw

Dia (mm) Grade Nominal Width Code  
25 44/60 1.6 1022099 £22.00
30 44/60 1.6 1022129 £27.00
40 44/60 1.6 1022150 £27.50
50 44/60 1.6 1022181 £33.25
65 44/60 1.6 1022211 £42.50
70 44/60 1.6 1022235 £46.50
75 44/60 1.6 1022259 £46.50
100 44/60 1.6 1022280 £46.75

Routers

Diamond Coated Routers for drilling, routing, rebating & trimming. Standard grit 44/60. Use at high speeds for efficient cutting. Routers over 6mm diameter should be run at speeds up to 18,000 rpm.

Diamond Coated Router No.0

3mm shank, head 3mm diameter. For use with high speed 'pencil' type air motor.

Code  
1021566 £16.75

Diamond Coated Router No.1

6mm shank, head tapering from 4mm to 3mm. Coated length 12.5mm.

Code  
1021573 £16.75

Diamond Coated Router No.2

6mm shank, head tapering from 5mm to 4mm. Coated length 12.5mm.

Code  
1021580 £17.60

Diamond Coated Router No.3

6mm shank, head domed 4.8mm diameter. Coated to shoulder length.

Code  
1021597 £27.10

Diamond Coated Router No.4

6mm shank, head domed 6mm diameter. Coated length 12.5mm.

Code  
1021603 £24.75

Diamond Coated Router No.5

6mm shank, head tapering from 5mm to 3mm. Coated length 25mm.

Code  
1021610 £32.00

Diamond Coated Router No.6

6mm shank, parallel, 25mm coated length.

Code  
1021627 £31.00

Diamond Coated Router No.7

6mm shank, tapering from 5mm to 3mm. Coated length 19mm.

Code  
1021634 £26.00

Arbor

6mm shank and 6.35mmm register, suitable for use with small diameter sawblades in either AS50 or AS20 machines.

Code  
1021641 £11.25